| QTY. | DESCRIPTION | APPLICATION |
| 4 | 2" General Purpose, Quick Change, Surface Conditioning Discs, Medium | Remove head, intake, water pump, thermostat, valve cover, and oil pan gaskets and their residue on cast iron parts. Can be used for general cleanup. |
| 4 | 2" General Purpose, Quick Change, Surface Conditioning Discs,Very Fine | Remove gaskets and their residue on aluminum parts. General cleanup and rust removal. Also used for light deburring. |
| 3 | 2" Quick Change, Sanding Discs, Aluminum Oxide, 100 Grit | Remove and blend casting imperfections, blemishes and metal deposits. |
| 3 | 2" Quick Change, Sanding Discs, Aluminum Oxide, 150 Grit | Blend casting imperfections, blemishes and metal deposits. |
| 2 | 1" x 1" x 1/4-20 Flap Wheels, 120 Grit | Removal of metal over greater surface area. |
| 3 | 1" Cross Buffs®, 2-Ply, HP, Medium | Hone and clean lifter bores. |
| 1 | Handy Roll, 2" x 1 Yard, 320 Grit | Lightly deburr engine parts and hard-to-reach areas. |
| 6 | Cartridge Rolls, Full Tapered, 5/8" Diameter, 40 Grit | Remove large deposits of metal in casting lines and other engine imperfections. |
| 6 | Cartridge Rolls, Half Tapered, 5/8" Diameter, 40 Grit 80 Grit | Blending and finishing over where Cartridge Roll has been used. |
| 10 Total | Cartridge Rolls, Straight, 3/4" Diameter, (5) 40 Grit & (5) 80 Grit | Deburr large areas of the block. |
| 1 | 2" Holder Pad for Quick Change Discs | Use with Surface Conditioning & Grinding Discs. |
| 1 | 1/4" Diameter Mandrel | Use with Holder Pad. |
| 1 | Combination 4" x 1/4" Mandrel | Use with Cross Buffs® or Flap Wheels. |
| 3 | Set Screws | Use with Combination Mandrel. |
| 1 | 1/4" Diameter Mandrel, 2-3/4" O.A.L. | Use with Cartridge Rolls. |