Open-weave, non-woven nylon products with abrasive grain throughout. May be used with lubricants and solvents.
Cuts into labor time, not into the part. Our exclusive Buff & Blend™ material works best for fine finishing and cleaning of light scratches on aluminum.
Bench Grinder Discs shown are packaged 25 to a pack. Call for additional product availability.
|
Bench Grinder Discs
Quickly remove carbon from pistons and valve stems. Great for light deburring head bolts and studs. One disc is flexible when run alone. Stack as many discs on at a time for the desired finish and removal rate. Safer than a wire wheel, with a much better finish.
With Center Hole
PART NO. SIZE GRAIN GRADE MAX R.P.M.*
850708 6" x 1/2" A/O Very Fine 3,600
850710 6" x 1/2" A/O Medium 3,600
850908 8" x 1/2" A/O Very Fine 3,000
850910 8" x 1/2" A/O Medium 3,000
|
Wheels
- Aluminum and steel wheel preparation
prior to high-gloss polishing.
- Corrosion removal in large bores.
PART NO. DIA. PLY GRAIN GRADE MAX R.P.M.*
265401 2" 1 A/O Medium 12,000
265402 2" 1 A/O Very Fine 12,000
265403 2" 2 A/O Medium 12,000
265404 2" 2 A/O Very Fine 12,000
265405 2" 3 A/O Medium 12,000
265406 2" 3 A/O Very Fine 12,000
265407 3" 1 A/O Medium 12,000
265408 3" 1 A/O Very Fine 12,000
265409 3" 2 A/O Medium 12,000
265410 3" 2 A/O Very Fine 12,000
265411 3" 3 A/O Medium 12,000
265412 3" 3 A/O Very Fine 12,000
880333 2" x 1/4-20 1 A/O Very Fine 12,000
880335 2" x 1/4-20 2 A/O Very Fine 12,000
880533 3" x 1/4-20 1 A/O Very Fine 12,000
880535 3" x 1/4-20 2 A/O Very Fine 12,000
|
*Maximum wheel performance for most applications is achieved at speeds less than the maximum R.P.M.
Wheels shown are packaged individually. Call for additional product availability.
|
Copyright 2006 Standard Abrasives - All rights reserved - Any unauthorized copying or distribution forbidden by law.
|